Product Name: Thermal Printhead
Model : X60 X65 53mm
Category: Markem Printhead
Part Number: ENM10104650
Delivery Time: 1-3 days
Warranty:3 months/30km
We supply genuine OEM and fully tested thermal transfer overprinting (TTO) printheads for Markem Imaje SmartDate coders, shipped worldwide to packaging manufacturers, MRO buyers, co-packers and equipment resellers who cannot afford coding downtime. The ENM10104650 is the genuine OEM High Speed 300 DPI Near Edge printhead for the Markem Imaje SmartDate X60 and X65 coders, with a 53mm print width. It is also referenced by the Kyocera part numbers KCE-53-12PAT1-X60 and KCE-53-12PAR1-MKME, and by the Markem Imaje catalogue numbers ENM10058307 and 10058307. This High Speed variant is distinct from the Standard Wear Resistant (ENM10104648) and the High Energy (ENM10104651) — it is optimised for maximum throughput, printing at up to 1800mm/s on the SmartDate X65 and up to 1000mm/s on the SmartDate X60 at full 300 DPI resolution.
Not sure which variant your coder needs? Contact us with your printer serial number or the part number on your existing printhead label, and our team will confirm the correct replacement before you order.
💬 Get Real-Time Price & Stock Now
💬 Get Real-Time Price & Stock Now
The ENM10104650 is engineered for the SmartDate X60 and X65’s maximum production speed configurations — delivering 300 DPI TTO coding at up to 1800mm/s and 455 packs per minute on the X65, and up to 1000mm/s on the X60. Its Near Edge element design positions the heating elements at the very edge of the printhead substrate, minimising the distance between heat generation and ribbon transfer, which keeps codes sharp and consistent at the highest packaging line speeds without compromising barcode scan reliability.
This is a genuine Markem Imaje OEM printhead manufactured by Kyocera to the exact Near Edge thermal element specifications of the SmartDate X60 and X65 High Speed configuration. It arrives in original branded packaging with full OEM warranty, for direct drop-in installation with no calibration, no print parameter adjustment, and no risk to your line uptime or compliance status.
The High Speed variant is optimised for near-edge wax-resin ribbons on standard flexible packaging substrates, including polypropylene, polyethylene, polyolefin, nylon and polyester films — covering the most common flexible packaging applications on SmartDate X60 and X65 lines in food, beverage and consumer goods production.
At maximum SmartDate X65 throughput, code quality must remain consistent and audit-ready on every pack. This printhead maintains the 300 DPI print precision required for GS1 barcode verifiability, serialisation compliance and regulatory date coding at the line speeds where the SmartDate X65 is most commonly deployed in high-output FMCG packaging.
Every printhead is checked against its part number and inspected for physical condition before it ships. We confirm compatibility with your printer serial number before you order, fulfil orders in 1–3 business days with export documentation for DHL, FedEx and UPS, and support both single-unit and bulk procurement — so whether you’re replacing one printhead or stocking spares across several plants, you order the right part the first time.
The Markem Imaje SmartDate X60 and X65 are available with three different 53mm printhead configurations. Selecting the correct variant is essential for consistent print quality and maximum printhead service life.
If you are unsure which variant is installed in your SmartDate X60 or X65, contact us with your printer serial number or the part number on your current printhead, and our team will confirm the correct replacement before you order.
Food and Beverage — The SmartDate X65 with this High Speed printhead is the benchmark TTO solution for high-output bakery, dairy, snack, ready-meal and beverage flexible packaging lines running at maximum throughput, maintaining 300 DPI code clarity at up to 455 packs per minute.
Pharmaceuticals — High-speed pharmaceutical packaging lines using the SmartDate X65 for serialisation, GS1 DataMatrix coding and regulatory compliance labelling depend on this printhead for consistent barcode verifiability at maximum line speeds.
Cosmetics and Personal Care — High-volume cosmetics and personal care packaging operations using the SmartDate X60 or X65 for batch coding, date marking and brand traceability on sachets, foil pouches and laminate film rely on this printhead for consistent output across continuous production runs.
Electronics Packaging — Electronics manufacturers coding compliance information, serial numbers and traceability data on flexible film packaging use the SmartDate X60 and X65 with this printhead for fast, reliable variable data coding.
Replace the ENM10104650 when you notice any of the following on your SmartDate X60 or X65 output:
Regular printhead cleaning after each ribbon cassette change is recommended to extend service life. Proactive replacement before complete element failure prevents unplanned line stoppages and maintains audit-ready code quality at all times.
What is the difference between ENM10104650 and ENM10104648 / ENM10104651?
All three are 53mm 300 DPI OEM printheads for the SmartDate X60 and X65, but optimised for different applications. ENM10104648 is the Standard Wear Resistant version for general TTO applications. ENM10104650 is the High Speed Near Edge version for maximum line throughput on standard flexible films. ENM10104651 is the High Energy version for difficult substrates requiring higher thermal output. Installing the wrong variant will result in suboptimal print quality or premature printhead wear.
What Kyocera and alternative part numbers correspond to ENM10104650?
It is also referenced as ENM10058307, 10058307, KCE-53-12PAT1-X60, KCE-53-12PAR1-MKME and GTEQ-5360PH. All describe the same genuine OEM 53mm High Speed Near Edge 300 DPI TTO printhead for the SmartDate X60 and X65.
How do I confirm which printhead variant is installed in my SmartDate X60 or X65?
The OEM part number is printed on a label on the printhead body. Open the printhead cassette on your SmartDate and check the label for the ENM or KCE part number. Contact us with that number and we will confirm the correct replacement variant before you order.
Is ENM10104650 compatible with the SmartDate X60-128 or X65-128 wide-format configuration?
No. The ENM10104650 is the 53mm printhead. The X60-128 and X65-128 configurations require a 128mm printhead with a different OEM part number. Contact us for the correct wide-format printhead if needed.
Do you offer bulk pricing or international export shipping?
Yes. We support single unit orders and bulk procurement with full commercial documentation for international export via DHL, FedEx and UPS. Contact us for volume pricing and lead time confirmation on the ENM10104650.
Ready to restore full High Speed TTO performance on your Markem Imaje SmartDate X60 or X65? Contact our team today for pricing, stock availability and international shipping options on the genuine ENM10104650 OEM printhead. Bulk orders and export documentation are available on request. Not sure if ENM10104650 is the correct variant for your coder? Contact us with your printer serial number and we will confirm before you order.
